View HKR1105W_1030580.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Product Guide
H__1105W Series, Dome Lens Type SMT LED
s Features
* Dome lens provides intensified narrow, bright beam * Available for both standard and reverse mounting * Wider operating temperature: -40 ~ +100C * (HBG: -40 ~ +85C)
s Applications
* High-beam indicator for automotive use * Backlighting for automotive dashboards * Indoor / outdoor full-color signboards
s Outline Dimensions
s Recommended Solder Pad on a Surface Mount
1.55 0.6 1.6 0.3
Anode
s Recommended Solder Pad on a reverse mount
(1.6) 1.6 1.5 HOLE
Polarity Mark Cathode PCB
0.5
0.5
R0.8
Cathode Mark
0.6
2.3+0.05
Unit: mm Tolerance + 0.1
s Electro-Optical Characteristics
Part No. Material Emitted Lens Color Color
GaAlAs GaAlAs GaAsP GaAsP GaP GaP GaP
Red Red Orange Yellow Yellow-Green Green Pure Green
(Ta=25C) Wavelength
Peak p TYP. Dominant d TYP. Spectral Line Half Width TYP. IF
Luminous Intensity IV
MIN. TYP. IF
Forward Voltage VF
TYP. MAX. IF
Reverse Viewing Current IR Angle
MAX. VR
(2 1/2)
HKR1105W HBR1105W HAA1105W HAY1105W HPY1105W HPG1105W HBG1105W
70 150 20 25 10 Water 10 Clear 20 15 6 50 20 20 50 30 12 mcd 20 20 20 20 20 20 mA
660 660 605 580 570 560 555
647 647 606 590 572 567 558 nm
25 30 30 30 30 30 30
20 20 20 20 20 20 20 mA
1.8 1.7 2.2 2.2 2.1 2.1 2.1 V
2.5 2.0 2.5 2.5 2.5 2.5 2.5
20 20 20 20 20 20 20 mA
100 100 100 100 100 100 100 A
4 4 4 4 4 4 4 V
30 50
40
Units
Deg.
1.5
2.1 + 0.05
(4.6)
3.2
1.6
(2)
s Absolute Maximum Ratings
Item
Power Dissipation Forward Current Peak Forward Current Reverse Voltage Operating Temperature Storage Temperature Derating*
Red Orange Yellow Yellow-Green Green Pure Green
(Ta=25C) HAA 75 30 70 4 HAY 75 30 70 4 -40 to +100 -40 to +120 1.0 (DC) 2.33 (Pulse) HPY 75 30 70 4 HPG 75 30 70 4 HBG 75 30 70 4 -40 to +85 -40 to +100
0.42 (DC) 0.93 (Pulse)
Symbol HBR, HKR Pd 60(HBR),75(HKR)
IF IFM VR Topr Tstg IF 30 70 4
Units
mW mA mA V C C mA/C
* Ta=25C, IFM applies for the pulse width 1msec. and duty cycle 1/20. The current derating for operation applies when the temperature is above 25C for HBG and 75C for HVR, HBR, HKR, HAA, HAY, HPY & HPG
s Taping Specifications
1.75 + 0.1 4+0.1 1.5 +0.1 0 (1.8) (0.25)
for Reverse Mount Type
s Taping Specifications
1.5 +0.1 0 (1.85) 1.75 +0.1 4+0.1 (0.25) Center Hole
for Standard Mount Type
( 1.1)
2+0.05 4+0.1
3.5+0.05
(0.5) (2.2)
( 1.1)
2 + 0.05 4+0.1
3.5 +0.05
(3.45)
(3.5)
Quantity on tape: 2000 pieces per reel
8+0.2
Quantity on tape: 2000 pieces per reel
(2.1)
2+0.5 21+0.8
Center Hole
Cathode
Center Hole
8+0.2
13+0.2 +1 60 -0 13+0.2
Direction to pull
RR
Cathode
9+0.3 11.4+1 +0 180 3
s Operation Current Derating Chart (DC)
Direction to pull
TR
HAA, HAY, HPG, HPY, HBR, HKR HBG
s Precautions
Please follow these handling precautions to prevent damage to the chip and ensure its reliability. 1. Soldering conditions: * Soldering iron: Temperature at tip of iron: 280C max. (30W max.) Soldering time: 3 sec. max. * Dip soldering: Preheating: 120 ~ 150C max. (resin surface temp.) 60 ~ 120 sec. max. Bath temperature: 260C max. Dipping Time: 5 sec. max. * Reflow Soldering:
LED Surface Temperature C Operation Heating 240 Temperature rise: 5C/sec. Cooling: --5C/sec.
s Spatial Distribution
(X & Y) (X & Y)
150 120
Pre-heating
2. Cleaning: * If cleaning is required, use the following solutions for less than 1 minute, at less than 40C. * Appropriate chemicals: Ethyl alcohol and isopropyl alcohol. * Effect of ultrasonic cleaning on the LED resin body differs depending on such factors as the oscillator output, size of PCB and LED mounting method. The use of ultrasonic cleaning should be enforced at proper output after confirming there is no problem.
HKR, HAA, HAY, HPY, HPG, HBG HBR
Product specifications subject to change without notice. PGH__1105W-0301
~
0
60 to 120 sec.
5 sec. max
Stanley Electric Sales of America, Inc.
2660 Barranca Parkway, Irvine, CA 92606 * Tel: 800-LED-LCD1 (533-5231) * Fax: 949-222-0555 Website: www.stanley-electric.com

▲Up To Search▲

Price & Availability of HKR1105W

	To Download HKR1105W Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .